|Application:||sheet metal and metal tube cutting||Cutting Materials:||copper, aluminium, tungsten, molybdenum etc|
|Cutting Thickness:||0.2-8mm( according to material )||Max Cutting speed:||8m/min( according to material )|
|Laser Output Power:||750W||Continuous Working Time:||24 hours|
|Cutting Area:||3000*1500mm||Environment temperature:||5°C—35°C|
Professional HE Fiber Laser Cutter Machine , Fiber Optic Laser Cutting System
Laser Cutting of Commonly Used Engineering Materials
1. Metal material
Almost all metal material has a high reflectivity of infrared wave energy at room temperature, but a launch far-infrared band 1.064 um beams of lamp pumped ND: YAG laser and 10.6 mu mCO2 laser are successfully applied in many metal laser cutting practice.
2. Non-metallic material
The CO2 laser beam with 10.6 mu wavelength can easily be absorbed by non-metallic materials. The bad thermal conductivity and low evaporation temperature make the absorbed beam be entirely inside the material and make instant vaporization form in the light irradiation, forming the initial hole. These are the virtuous cycle in cutting process.
Training and after sales service
1, Seller has the obligation to arrange training for buyer on how to set up, operate and perform maintenance on the machines at seller’s company. Training at buyer’s location will be compensated by paying the cost for sending engineer, the cost will include go and back air ticket, visa application cost, local travel, food and hotel cost, etc. Buyer’s personnel who are to be trained shall as a minimum have the necessary knowledge and skills relevant to the training.
2, Seller provides 12 months guarantee from the date of shipping on board (on B/L). Within the guarantee time, If any spare part is damaged by wrong operation by customer, seller shall get payment from customer for replace cost or repairing cost, including the spare parts shipping cost . If the failure reason is due to bad quality of the spare part, buyer shall send back the broken spare part and seller will repair and send back to buyer. Seller will not charge for the repairing cost. But shipping cost shall be shared by both parties. All consumable parts and optic lens have no guarantee.
Working environment demand
Users should provide good environments for equipments such as level floor for equipment placement without strong motion, clean and dry environment without dust, 5-350C for equipment working. Working power supply should be provided: three-phase five-wire power 380V/50HZ/60A. Users should prepare air compressor (more than 0.6 square meters per minute for air displacement, 0.8Mpa--1.25Mpa for air pressure), hydrogen, nitrogen and distilled water for cooling use (about 100L).
|Model||HECY3015C-500W | HECY3015C-750W|
|Medium of Laser||Nd: YAG|
|Max Cutting Speed(m/min)||8m/min|
|Cooling Way||water cooling|
|Cutting condition||Compressed air blowing|
|Pulse repeted Frequence||0-300Hz|
|Min line Width||0.12mm||0.15mm|
|Cutting Depth||0.2mm---6mm (500W)||0.2mm-8mm(750W)|
|Continuous Working Time||24 hours|
|Application||steel, aluminium,copper,sliver cutting|
|1. Spring Steel
2. Carbon Steel
3. Alloy Steel
4. Stainless Steel
2. Medical equipment
4. Automotive parts
5. Aviation & aerospace
6. Lighting lamps
7. Agricultural and forestry machinery
8. Hardware tools
11. Sheet metal fabrication
12. Fitness equipment
14. Metal carfts & decoration
ผู้ติดต่อ: Jane He